
A project manager stands on a bare concrete slab, staring up at a duct run, trying to figure out if it clears the corridor ceiling. The answer sits in a model two floors down, loaded on a workstation inside the BIM Box, or back at the trailer. So the PM walks back, or guesses and keeps moving. Resolve Field changes that math. It is an iPad app that works offline, so a field PM can open the model on site and get a quick answer without leaving the slab.
TLDR:
- Rework direct costs run about 5% of total construction costs, per ASCE research, and coordination gaps drive them.
- Field PMs have traditionally needed a BIM Box or a trip to the trailer to get answers out of the model.
- Resolve Field is an iPad app with offline mode that gives field PMs quick answers from the model.
- Clash detection confirms geometry, not buildability, so the field still needs to look at the space.
- Issues raised in Resolve sync to ACC, BIM 360, Procore, and Revizto.
Field PMs Need Answers on the Spot
PMs own the schedule, the issue log, and the coordination outcome. The model lives with the VDC team. On site, the questions are concrete: what runs above this ceiling, how much clearance is left, who installs first. When the answer sits in a model back at the trailer, the PM absorbs the delay and still answers for the outcome.
BIM model access for project managers is a delivery question, not a software preference. Nearly half of survey respondents report BIM use on 76-100% of their projects. Most field apps hand PMs a viewer, not a way to get a quick answer on site.
The Project Manager's Role in BIM Coordination
The PM rarely builds the model. That's the VDC engineer's job. When coordination slips, the PM is the one explaining why an RFI didn't get resolved before steel went up.
Their KPIs tell the story: issue coordination velocity, sign-off timelines, issue log completeness. All three depend on other people moving. The VDC team flags the issue. Trade partners respond. Designers approve. The PM manages the chain without controlling any link in it.
A PM who can't get into the model independently on site waits for someone else to surface problems that may already be costing schedule days. Resolve Field is built for that moment: quick answers from the model, right where the question comes up.
Why the Model Stays in the Trailer
The model exists. Getting to it is the problem.

Most coordination tools were built for desktop specialists. They require training, a Windows machine, and often a license that costs thousands per seat. A superintendent on site with an iPad, or a PM moving between meetings, gets none of that. The options on site are a BIM Box, a walk back to the trailer, or a PDF export if the PM is lucky, a sign of weak BIM access for field teams.
Even when access exists, large federated models crash underpowered laptops. Mobile viewers strip out metadata. Signal drops on lower levels and inside concrete shells, so a viewer that needs a connection fails right when the PM needs it most. Issues scatter across Procore, BIM 360, email threads, and whiteboards, with no single version anyone trusts.
The downstream cost is real. Research published by ASCE found that rework direct costs consistently reach about 5% of total construction costs, tracing to information that existed in the model but never reached the people who needed it, early enough to act.
What Resolve Field Does
Resolve Field is an iPad app with offline mode. A field PM opens the model on site, goes to the spot in question, and gets the answer without a signal, a BIM Box, or a walk back to the trailer.
A field app earns its place when it meets four requirements:
- Offline mode, so a dead zone or a basement level does not block the answer
- Runs on an iPad, with no BIM Box or trailer workstation
- Quick answers from model information that stays locked up in traditional workflows
- Issues that land in the logs the PM already works from (Procore, ACC, BIM 360, Revizto)
When any of these breaks, the PM is back to calling the VDC team and waiting.
| Requirement | What It Unlocks | What Breaks Without It |
|---|---|---|
| Offline mode | PMs get answers on lower levels and dead zones without waiting for a signal | The model is unreachable exactly where coordination questions come up |
| Runs on an iPad, no BIM Box or trailer workstation | The PM carries the model onto the slab | Every question becomes a walk back to the trailer |
| Quick answers from the model | Information locked in the model reaches the person making the field call | Teams depend on a VDC specialist to surface every answer |
| Issues that reach existing logs (Procore, ACC, BIM 360, Revizto) | The PM's existing log stays the single source of truth | A parallel log appears and status tracking fragments across tools |
One Issue Log
Fragmented issue logs cost schedule. A VDC engineer logs a clearance problem in BIM 360. Someone screenshots it into a Procore observation. A trade partner tracks it in a spreadsheet. The PM chases status across all three, with no version anyone fully trusts.
A field app that keeps findings in its own silo adds a fourth log. If a PM gets a fast answer on an iPad but that finding never reaches Procore or ACC, the answer has not helped the team. Field answers only matter if what the PM finds ends up in the log the team runs on.
Two-way sync to Procore, ACC, and Revizto is the minimum bar for issue tracking and resolution that serves a PM's actual workflow. Resolve writes issues created in VR, on the web, or on iPad back to those tools, so the PM's log stays the source of truth. No parallel tracking, no manual reconciliation.
Beyond Clash Detection
Clash detection is a prerequisite, not a finish line. Navisworks tells you whether a pipe intersects a beam. It cannot tell you that a technician can't reach the valve behind it, or that a corridor between two mechanical rooms is code-compliant on paper but impossible to pass through with equipment.
A clash-free report gives the PM a green light on geometry. The questions left over show up on site: an electrical panel blocked by ductwork installed first, a roof hatch positioned over equipment that makes it unusable, a maintenance path that works in plan but disappears under a dropped ceiling. None of those are clashes. All of them surface at the exact spot, at the moment the PM needs the model in hand.
That's the moment Resolve Field was built for. Instead of a walk back to the trailer for a BIM Box, the PM pulls up the model on the iPad, offline, and checks it on the spot. For project managers structuring BIM coordination workflows, clash detection runs first. The field catches what automation cannot flag.
Field Leadership in the Model
Owners know how a facility must operate. Superintendents know what can and cannot be built. Facilities managers know where maintenance access fails. None of them should need a Navisworks license or a walk back to the trailer to contribute that knowledge before concrete gets poured.
The barrier is rarely willingness. A foreman who can walk a job site and spot a dozen problems in an hour will do the same with the model in hand on an iPad. Holding the model while standing in the space matches how a foreman already reads a building. Those field findings feed directly into a constructability review in VR, with no IT involvement or training time.
Feedback that stays verbal disappears. Findings need to tie to a specific location and model object, logged by someone who may not know what a BIM property set is but absolutely knows the valve is unreachable.
Field Answers and Pre-Construction Reviews
Pre-construction coordination runs in sequence: design intent comes in, clash detection runs, 2D drawings go out for markup. Resolve reviews in VR, on web, and on iPad cover the gap that opens after clash detection and before construction starts. Resolve Field carries that same model onto the job site, so the questions raised in those reviews can get answered again once work is underway.
Constructability reviews are where field leadership earns their place in the model. A superintendent moving through a mechanical room at human scale will find the catwalk that's technically wide enough but impossible to walk with a conduit spool. That observation never comes from a clash report. It comes from someone who has installed conduit before, standing in the space where it has to go.
Timing is the thread that ties these reviews together, a common theme in any BIM collaboration and coordination breakdown. The value of surfacing a concern drops sharply once work is in progress. Pre-construction is when findings are cheap to act on, and the field is where you find out whether the model matches what actually gets built.
Where Resolve Field Fits
Resolve Field is the iPad app built for field project managers. It works offline and gives quick answers from the model without a BIM Box or a walk back to the trailer. The same model gets reviewed on web, iPad, and Quest headsets across Resolve, so field and office stay on one version.
The Wellington Engine is Resolve's proprietary rendering technology. It lets large federated models run on edge devices such as tablets, laptops, and standalone Quest headsets, with no PC tether and no model downsizing, a core piece of BIM coordination best practices for large projects. For data center builds and pharma facilities where model size disqualifies most viewers, that matters.
Every issue raised in Resolve, whether from VR, web, or iPad, syncs through two-way integration with Autodesk Forma, BIM 360, Procore, and Revizto. The PM's existing log stays the record. Resolve has been trusted across more than $50B in construction projects and over 6GW of data center portfolios because it fits the workflows teams already run.
Answers Where the Work Happens
The model already holds the answer. The gap is getting it to the PM standing on the slab, early enough to act on it. Resolve Field puts that answer on the iPad, offline, with no BIM Box and no trip back to the trailer. Request a demo of Resolve Field.
FAQ
What is Resolve Field?
Resolve Field is an iPad app built for field project managers, superintendens, and foreman. It gives quick answers to information locked inside the BIM model, right where a PM stands on site, with an offline mode for areas without a connection.
Does Resolve Field work without an internet connection?
Yes. Resolve Field includes an offline mode, so lower levels and dead zones do not block the answer a PM needs from the model.
Do field PMs still need a BIM Box or a trip to the trailer to check the model?
That was the traditional route: walk back to the trailer or rely on a BIM Box to get into the model. Resolve Field replaces that trip with the iPad the PM already carries on site.
What does clash detection miss that a PM still has to check on site?
Clash detection confirms geometry. It cannot show whether a technician can reach a valve, whether a corridor is passable with equipment, or whether a hatch is blocked by work installed first. Those problems surface in the field, so the PM needs the model in hand at the spot.
